與AutoCAD2008的第一次接觸

  前幾天因為2006的工具列消失,雖然以載入備份CUI檔將工具列圖示救回來,但是並沒有把問題完全解決。
  也因此,乾脆就把舊版本都移除掉,試用2008看看。

  今天完成安裝,就開始了比對先前配置安排如今工作區的工作。
  習慣性的想叫出Express圖層工具列,要將它排在水平工具列的第二排,卻發現遍尋不著。
  我先是檢查安裝光碟的工具安裝是否又把Express改回另外安裝,記得這功能是在2006時成為內訂安裝,走回頭路的機率應該不高,而檢查後的結果也如預期。
  那麼,就是看看現在的工具列是不是有什麼以前沒看過的名字出現了。

  圖層工具列、圖層 II 工具列……啊!真是令人驚喜,現在Express圖層工具列已經完全地成為AutoCAD的一份子,新名字叫「圖層 II 工具列」,而且圖示也重新再繪製過,和其餘工具列圖示擺在一起順眼不少。

  從2000版開始,我一直都有使用該工具列,在2006時就注意到它已由另外安裝的型式改為內建。
  但,工具列圖示很粗糙,說明也沒有譯為中文,與其他工具列明顯不同,讓人覺得有點礙眼。
  可是它的功能在應用圖層時,幾乎可說是必備的,所以也只好睜隻眼閉隻眼的由它存在著。

  所以當發現它成為AutoCAD內建工具列的一份子,我真的還蠻高興的,所以就先把這條放在前面講。
  與2006比起來,2008也改變了不少地方。
  光在一開始開新檔案後的配置,預設工具區即有三種選擇可供使用:「AutoCAD典型」、「2D繪圖與註解」、「3D塑型」。
  下方狀態列的按鈕除了原有的「鎖點」、「格線」、「正交」…等,多出了一顆「DUCS」的按鈕。在先前嘗試建製3D model時,就曾碰過此功能,用以切換各種方向的工作平面。
  因此多了個這樣的按鈕,而且工具區模式還特定內建「3D塑型」,可感覺到AutoDesk的野心,希望AutoCAD不只是個繪製2D CAD圖的利器,亦可成為一個建構3D model的工具之一。

7948 Responses to “與AutoCAD2008的第一次接觸”


  1. 1 ラブドール

    HeoroThe great meadhall which King Hrothgar builds.It isinvaded by Grendel for twelve years.ラブドール 激安

  2. 2 comment-1231041

    I must thank you for the efforts you’ve put in writing this blog.

    I really hope to view the same high-grade blog posts by you
    in the future as well. In truth, your creative writing abilities
    has inspired me to get my own website now 😉

  3. 3 Kraken зеркало

    Nice post. I learn something totally new and challenging
    on websites I stumbleupon everyday. It’s always helpful
    to read content from other authors and use a little something from their sites.

  4. 4 ラブドール

    that I want to amuse you.フィギュア 無 修正You aremistaken in that,

  5. 5 ラブドール

    Jane asked him what on earthhe was doing and he said he was repeating the multiplication table overand over to steady his nerves and for pity’s sake not to interrupthim,because if he stopped for a moment he got frightened and forgoteverything he ever knew,エロオナホ

  6. 6 https://ufabot.vip/

    UFABET

  7. 7 ラブドール

    ラブドール 女性 用‘ he began,’listen,

  8. 8 homepage

    you are truly a just right webmaster. The site loading speed is amazing.
    It sort of feels that you’re doing any unique trick.
    Furthermore, The contents are masterwork. you’ve performed a wonderful task in this matter!

  9. 9 ラブドール

    フィギア エロhe would doubtless have recognised that thequestion cannot be decided on grounds so simple as those to which heconfines himself.When a person,

  10. 10 ラブドール

    Dorothy stood up and found she was in her stockingfeet.ラブドール 激安For the SilverShoes had fallen off in her flight through the air,

  11. 11 ラブドール

    who swept the school and kindled the fire,エロ フィギュア 無 修正annexed it as oneof his perquisites.

  12. 12 ラブドール

    7 C.proposes to take ‘weaxan’ = L.人形 エロ

  13. 13 kraken36

    Yesterday, while I was at work, my cousin stole my iphone and tested to see if it
    can survive a thirty foot drop, just so she can be a youtube sensation. My iPad is
    now destroyed and she has 83 views. I know this is completely
    off topic but I had to share it with someone!

  14. 14 Descubra Como

    Quarta dica o traço Tétrico a formação ocorre cerca de 4 aos 5 anos a
    mielinização, que ocorre esteio sacral.

    Also visit my site :: Descubra Como https://Fastcut.top/08tccp

  15. 15 ラブドール

    The building was early inward made ready For the footgoing guests as the good one had ordered.オナホ フィギュア{Beowulf sits by his liegelord.

Leave a Reply

It sounds like SK2 has recently been updated on this blog. But not fully configured. You MUST visit Spam Karma's admin page at least once before letting it filter your comments (chaos may ensue otherwise).