與AutoCAD2008的第一次接觸

  前幾天因為2006的工具列消失,雖然以載入備份CUI檔將工具列圖示救回來,但是並沒有把問題完全解決。
  也因此,乾脆就把舊版本都移除掉,試用2008看看。

  今天完成安裝,就開始了比對先前配置安排如今工作區的工作。
  習慣性的想叫出Express圖層工具列,要將它排在水平工具列的第二排,卻發現遍尋不著。
  我先是檢查安裝光碟的工具安裝是否又把Express改回另外安裝,記得這功能是在2006時成為內訂安裝,走回頭路的機率應該不高,而檢查後的結果也如預期。
  那麼,就是看看現在的工具列是不是有什麼以前沒看過的名字出現了。

  圖層工具列、圖層 II 工具列……啊!真是令人驚喜,現在Express圖層工具列已經完全地成為AutoCAD的一份子,新名字叫「圖層 II 工具列」,而且圖示也重新再繪製過,和其餘工具列圖示擺在一起順眼不少。

  從2000版開始,我一直都有使用該工具列,在2006時就注意到它已由另外安裝的型式改為內建。
  但,工具列圖示很粗糙,說明也沒有譯為中文,與其他工具列明顯不同,讓人覺得有點礙眼。
  可是它的功能在應用圖層時,幾乎可說是必備的,所以也只好睜隻眼閉隻眼的由它存在著。

  所以當發現它成為AutoCAD內建工具列的一份子,我真的還蠻高興的,所以就先把這條放在前面講。
  與2006比起來,2008也改變了不少地方。
  光在一開始開新檔案後的配置,預設工具區即有三種選擇可供使用:「AutoCAD典型」、「2D繪圖與註解」、「3D塑型」。
  下方狀態列的按鈕除了原有的「鎖點」、「格線」、「正交」…等,多出了一顆「DUCS」的按鈕。在先前嘗試建製3D model時,就曾碰過此功能,用以切換各種方向的工作平面。
  因此多了個這樣的按鈕,而且工具區模式還特定內建「3D塑型」,可感覺到AutoDesk的野心,希望AutoCAD不只是個繪製2D CAD圖的利器,亦可成為一個建構3D model的工具之一。

907 Responses to “與AutoCAD2008的第一次接觸”


  1. 1 Trade 350 App

    I am really loving the theme/design of your blog. Do you ever run into any internet browser
    compatibility problems? A number of my blog
    visitors have complained about my website not working correctly in Explorer but looks great in Firefox.
    Do you have any advice to help fix this issue?

  2. 2 зеркало мега сб

    С Mega покупки становятся лёгкими благодаря понятной
    навигации и огромному выбору.
    От электроники и одежды до уникальных коллекционных вещей – всё это есть на зеркало мега сб.

  3. 3 scatter hitam

    Heya! I realize this is somewhat off-topic but I had to ask.

    Does building a well-established website like yours
    take a lot of work? I’m brand new to running a blog however I do write in my
    diary daily. I’d like to start a blog so I will be able to
    share my own experience and thoughts online. Please let me know if you have any kind
    of suggestions or tips for new aspiring blog owners. Thankyou!

  4. 4 после лазерной эпиляци

    Hey there! I’ve been reading your web site for a while now and finally got the bravery to go ahead and give
    you a shout out from Porter Texas! Just wanted to tell you keep
    up the excellent work!

  5. 5 Finance Legend

    I got this web page from my buddy who informed me concerning this website and now this
    time I am visiting this site and reading very
    informative content at this time.

  6. 6 buy fluvastatin online

    Hey there! This is my first visit to your blog! We are a team of volunteers
    and starting a new initiative in a community in the same niche.

    Your blog provided us valuable information to work on. You have done a wonderful job!

  7. 7 mwbex.com child sexual abuse

    Hi there, yup this paragraph is really good and I have learned
    lot of things from it concerning blogging. thanks.

  8. 8 http://Forum.depaddock.net/member.php?u=37907

    Pretty! This was an incredibly wonderful post. Thank you for supplying these details.

    My web site … http://Forum.depaddock.net/member.php?u=37907

  9. 9 cosmetic solution

    It’s going to be end of mine day, but before finish I am reading
    this fantastic article to improve my experience.

Leave a Reply

It sounds like SK2 has recently been updated on this blog. But not fully configured. You MUST visit Spam Karma's admin page at least once before letting it filter your comments (chaos may ensue otherwise).